Publication Number AD05006002E
Page 2
After downloading and installing SWD-Assist, double click its icon on the desktop
to start the software and the following screen will open.
This is the offline environment for building a SmartWire-DT system. To
accomplish this all part numbers for the equipment being connected to this
system must be known. For this example, the following SmartWire-DT devices
will be used:
(1) EU5C-SWD-EIP-MODTCP (SmartWire-DT Ethernet gateway)
(3) DIL-SWD-32-002 (contactor modules)
(1) M22-SWD-LED-R (red LED module)
(1) M22-SWD-K22LED-W (start/stop pushbutton with white LED module)
(1) M22-SWD-K22LED-G (selector switch with green LED module)
(1) M22 enclosure (M22-I3) with the following:
(1) M22-SWD-K11LEDC-W (pushbutton and white LED module)
(1) M22-SWD-KC11 (pushbutton module)
(1) M22-SWD-K11LEDC-W (pushbutton and white LED module)
The following section will demonstrate configuring a SmartWire-DT system offline
then downloading it to the Ethernet gateway. The next section will demonstrate
connecting SWD-Assist to a wired and powered SmartWire-DT system utilizing
the auto configuration feature.
