Publication Number AD05006002E
Page 11
For this example, all devices will be configured with a subnet mask of
255.255.255.0. Each device will be configured with the following IP Addresses:
ELC-COENETM
192.168.1.2
EU5C-SWD-EIP-MODTCP
192.168.1.3
Apply the changes and close this window.
The information required by the Modbus TCP master is now all known. The IP
address of the gateway along with the Modbus Data addresses and lengths for
the Input and Output data is shown above.
Double click the ELCSoft icon to open the ELC programming software. ECISoft
must have been previously installed then the ECISoft icon on the ELCSoft toolbar
will open this Ethernet configuration software for the ELC-COENETM module. If it
has not been installed, close ELCSoft, download ECISoft from the Eaton website
at the link below and install it.
http://www.eaton.com/Electrical/USA/ProductsandServices/AutomationandContr
ol/ProgrammableLogicControllers/EatonLogicControllers/ELCSoftwareHandheld
Programmer/index.htm
Then open ELCSoft and click the ECISoft icon to open it per the window shown
below:
