Eaton Scantronic i-on10, Configuration Manual

Page: 70 / 73

Installer Menu Map
Page 70
Delete Keypad
Enable Keypad Yes (all keypads enabled)
Replace Keypad
2 Outputs
Wired outputs
(
Panel EDIT output
Name
Type
For outputs 1 and 3, the default
"Type" is "Siren". For output 2, the
default "Type" is "Strobe".
Polarity Normal
Latched No For User-Defined output type.
Pulsed No Not available for dedicated siren and
strobe outputs.
Delay 0 seconds
Available when
Pulsed set to “Yes”.
On Time 1 second
Zones None Available only for Zone Follow and
Zone Alarm output types.
Plug-by
outputs
EDIT PLUG-BY
O/P1... Name
Type O/P1: Fire Alarm
O/P2: Hold Up Alarm
O/P3: Burglar Alarm
O/P4: Open / Close
O/P5: Zone Omit (System)
O/P6: Tamper
O/P7: Confirmed Alarm
O/P8: General Fault
Polarity
Normal
Latched
No For User-Defined output type.
Pulsed
No Not available for dedicated siren and
strobe outputs.
Delay 0 seconds
Available when Pulsed set to
“Yes”.
On Time 1 second
Zones None Available only for Zone Follow and
Zone Alarm output types.
3 Setting options
Full Set
Name
“Full Set”
Exit Mode Timed Set
Settle Time
15 seconds
Available only if Exit Mode is “Final
Door Set”.
Confirm Set On
Available only if Exit Mode is “Silent
Set”.
Exit Time
40 seconds
Available only if Exit Mode is “Timed
Set” or “Silent Set”.
Entry Time 40 seconds
Extended Entry Time 40 seconds
Siren Delay 0
Siren Time 15 minutes
Strobe on Set Off
Strobe on Unset Off
Part Set
B/C/D
(available only if a
zone has a Part Set
attribute)
Name
“Part Set B/C/D”
Exit Mode Instant Set
Settle Time 15 seconds
Available only if Exit Mode is “Final
Door Set”.
Confirm Set On Available only if Exit
Mode is “Silent
Set”.
Exit Time 40 seconds
Available only if Exit Mode is “Timed
Set” or “Silent Set”.
Entry Time 40 seconds
Extended Entry Time 40 seconds
Alarm Response Siren
Siren Delay 0
Siren Time 15 minutes
Pt.set Final Exit Final exit
Pt.set Entry Route Entry Route