6
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
Installation Guide
4. SWITCHING DOOR HANDING
1. Remove the three hinge pins (Fig 1).
2. Remove the hinge section from the enclosure frame (Fig 2).
3. Re-install the three hinge sections to the opposite side of enclosure frame (Fig 2).
4. Rotate the door 180 degrees.
5. Re-install the three hinge pins (Fig 1).
6. Loosen the two screws which secure the locking rods (Fig 3).
7. Remove the two screws on the back of the door lock and fixing plate (Fig 3).
8. Remove and rotate the door handle 180 degrees.
9. Replace the fixing plate and two screws (Fig 3).
10. Tighten the two screws which secure the locking rods (Fig 3).
