Eaton ProtoAir Start-Up Guide
Page 21 of 66
o
After entering the d
evice details, click on the “Start Discovery” button and the discovery
progress bar will display.
o
Discovering a device may take a few minutes depending on the number of items it contains.
After the discovery process is complete, the discovery tree will immediately come up.
The items being marked as green indicate that they have not been configured for protocol
conversion.
o
When clicking on gateways or gateways containing light panels a checkbox will check or
uncheck items for protocol conversion.
o
By clicking on a gateway, the parameters will be shown and can be edited.
Figure 18: Discovery Progress Bar
Figure 19: The Discovery Tree
Figure 20: View & Edit Gateway Parameters
