Eaton ProtoAir Start-Up Guide
Page 13 of 66
5
CONNECT THE PC TO THE PROTOAIR OVER ETHERNET
5.1 Connecting to the ProtoAir via the Ethernet Port
Connect a CAT5 Ethernet cable (straight through or cross-over) between the local PC and
ProtoAir.
The default IP Address for the ProtoAir Ethernet connection is
192.168.1.24
, Subnet Mask is
255.255.255.0
. If the PC and ProtoAir are on different IP networks, assign a static IP Address to
the PC on the 192.168.1.xxx network.
For Windows 7 or later:
Go to
>
>
>
>
Then right-click on Local Area Connection then click Properties
Highlight
then click
Use the following IP Address:
Click
twice.
Ethernet Port
Figure 9: Ethernet Port
