![background image](http://html1.mh-extra.com/html/eaton/powerxl-dx-net-ethercat-2/powerxl-dx-net-ethercat-2_manual_524574032.webp)
4 Commissioning
4.5 Engineering the module
28
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
▶
Switch the device on (turn on the power supply!).
▶
Now configure the project. (For information on a detailed configuration,
please consult the manual provided by the PLC‘s manufacturer.)
▶
Check the LED indicators.
The head-end controller must recognize the device address and the
module must light up green (
Section 2.2, “LED indicators“).
L1/L L2/N L3
DC-
EtherCAT
RUN
ERR