4 Commissioning
4.5 Engineering the module
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
27
4.5 Engineering the module
The following instructions explain how to configure the communication
module with a DA1 variable frequency drive.
Figure 16:RJ45 plug connection
▶
Connect the device to the EtherCAT environment.
You will need the following components to do so:
•
Head-end controller
•
Computer (for programming and configuration purposes)
•
Variable frequency drive DA1 with DX-NET-ETHERCAT-2 connection
Figure 17:Engineering
a
PC (with configuration tool)
b
Head-end controller (master) with EtherCAT interface
c
EtherCAT cable
d
Variable frequency drive DA1 with DX-NET-ETHERCAT-2 connection
COM
ERR
RUN
③
①
②
④
L1/L L2/N L3
DC-
U
DC+ BR
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
COM
V
W