46
Appendix A—Technical data and specifications
POWERXL SERIES VFDS
MN040060EN—September 2020 www.eaton.com
Appendix A—Technical data and specifications
Technical data
Table 27. PowerXL DM1 Series specifications (continued).
Section
Description
Specification
Input ratings
Rated input voltage
115 V 1-phase: 100-120 Vac 1-phase
230 V 1-phase: 200-240 Vac 1-phase
230 V 3-phase: 200-240 Vac 3-phase
480 V 3-phase: 380-480 Vac 3-phase
Voltage tolerance
-15%/10%
Input frequency
45 Hz to 65Hz
Input THD
>120%
Connection to power
Once per minute or less
Starting delay
3 s
Short-circuit withstand rating
100 kAIC (Fuses and circuit breakers)
65 kAIC (Type E CMC)
14 kAIC (Miniature breakers)
5 kAIC (All)
Power ride-thru
100 ms
Logic control ride-thru
.5 s Min, 2 s typical
Total watts loss
Typical efficiency 97.5% for 3-phase
Output ratings
Output voltage
115 V 1 phase input: 0-2*Vin 3-phase
230 V 1 phase input: 0-Vin 3-phase
230 V 3 phase input: 0-Vin 3-phase
480 V 3 phase input: 0-Vin 3-phase
Continuous output current
IL: ambient temperature maximum 40°C, up to 60°C with derating, overload
1.1 x IL (1 min/10 min)
IH: ambient temperature maximum 50°C, up to 60°C with derating, overload
1.5 x IH (1 min/10 min)
Overload current
150% of drive rating for constant torque
110% of drive rating for variable torque
Initial output current
200% (2 sec/20 sec)
Output frequency
0-400 Hz (standard)
Frequency resolution
0.01 Hz
Control characteristics
Control methods
Frequency control
Speed control
PM motor speed control
Performance:
V/Hz (volts per Hertz)
SVC (sensorless vector)
PM motor
±0.5% of base speed across a 30:1 speed range
±0.5% of base speed across a 60:1 speed range
±0.5% of base speed, up to a 20:1 speed range
Switching frequency
1 kHz to 16 kHz
Automatic switching frequency derating in case of overload
Frequency reference
Analog input: resolution 0.1% (10-bit), ac1%
Analog output: resolution 0.1% (10-bit), ac1%
Panel reference: resolution 0.01 Hz
Field weakening point
20 Hz to 400 Hz
Acceleration time
0.1 s to 3000 s
Deceleration time
0.1 s to 3000 s
Braking torque
DC brake: 30% x motor rated torque (Tn) (without brake chopper)
Dynamic braking (with optional brake chopper using an external brake resistor):
100% continuous maximum rating
.
