Step 2—Keypad Operation Overview
PowerXL DG1 Series Adjustable Frequency Drives
MN040012EN—March 2014
www.eaton.com
5
LED Lights
LCD Display
The keypad LCD indicates the status of the motor and the
drive and any faults in motor or drive functions. On the LCD,
the user sees information about the current location in the
menu structure and the item displayed.
Overview
Five lines shall be displayed in the screen. General view is as
following in
Figure 4
.
Figure 4. General View of LCD
The lines definition is as below:
The first line is State line, shows:
●
RUN / STP / NRD
—If motor is running, the run state shall
display “RUN”, otherwise the state display “STP”. “RUN”
blinks when the stop command is sent but the drive is
decelerating. “NRD” is displayed if the drive is not ready or
does not have a signal
●
FWD / REV
—If the motor running direction is clockwise,
display “FWD”, otherwise display “REV”
●
KEY / I/O / BPS / BUS
—If it is in bypass currently, display
“BPS”; otherwise, if the current control source is I/O
terminal, display “I/O”. If it is keypad, then display “KEY”;
otherwise display “BUS”
●
PAR / MON / FLT / OPE / QSW / FAV / TPM
—If the
current page is parameter menu, display “PAR”; If monitor
menu, then display “MON”; If fault menu, then display
“FLT”; If operation menu, then display “OPE”; If quick
start wizard, then display “QSW”; If optional card menu,
then display “BOA”; If favorite menu, then display “FAV”;
If main menu, then display “TPM”
The second line is Code line, shows the menu code.
The third line is Name line, shows the menu name or
parameters name.
The fourth line is Value line, shows the submenu name or
parameters value.
The fifth line is Soft key line, the functions of Soft key 1 and
Soft key 2 are changeable, and the real time is in the middle.
Table 3. LED State Indicators
Indicator
Description
Run
Run:
Indicates that the VFD is running and controlling the load in
Drive or Bypass.
Blinks when a stop command has been given but the drive is
still ramping down.
Fault
Fault:
Turn on when there is one or more active drive fault(s).
Blinks when there is one or more active drive warning(s).
Remote
Local/Remote:
Local: If the local control place is selected, turn off the light.
Remote: If the remote control place is selected, turn on the
light.
Drive Status
Direction Status
Control Place
Menu Location
Soft Key 2
Function Label
Soft Key 1
Function Label
Real Time Clock
(hh:mm)
Active
Selection
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com