manualshive.com logo in svg

Eaton Powerware 9395 275 kVA MBM, Installation And Operation Manual, Page: 39 / 86

Share
Download
Eaton Powerware 9395 275 kVA MBM Installation And Operation Manual Download Page 39

MBM INSTALLATION

Eaton 9395 Maintenance Bypass Module Installation and Operation Manual  

S

  164201719 Rev 3

 www.eaton.com/powerquality

4-7

Top View Front Bracket

Top View Rear Bracket

UPS Top

MBM Top

UPS Top

Screw from Kit

Screw from Kit

Screw from Kit

Screw from Kit

Bracket from Kit

MBM Top

Bracket from Kit

Back

Front

Front View Base Bracket

UPS Base

MBM Base

Bracket from Kit

Screw from Kit

Screw from Kit

Figure 4‐7. MBM to Eaton 9395 UPS Joining Brackets

4.3.2

Line-up-and-Match Power Wiring Installation

NOTE  

The MBM cabinet is shipped with a debris shield covering the ventilation grill on top of the unit. Do

not remove the debris shield until installation is complete. However, remove the shield before using the
MBM. Once the debris shield is removed, do not place objects on the ventilation grill.

NOTE  

Power wiring to the MBM maintenance bypass input and the output to the critical load must be run

in customer-supplied conduit.

NOTE  

Remove the MBM cabinet top or bottom conduit landing plate to drill or punch conduit holes (see

Figure 4‐8 on page 4-10).

NOTE  

Refer to the applicable Eaton 9395 Installation and Operation manual listed in paragraph 1.7 on

page 1-4 for UPS cabinet wiring information, and conduit and terminal locations.

To install wiring:

1.

Verify the UPS system is turned off and all power sources are removed. Refer to
the applicable Eaton 9395 Installation and Operation manual listed in paragraph
1.7 on page 1-4 for shutdown instructions.

2.

If not already open, unfasten the front door latch and swing the doors open (see
Figure 4‐1 on page 4-2).

Summary of Contents for Powerware 9395 275 kVA MBM























































































Reviews:

No comments