Eaton 9395 Maintenance Bypass Module Installation and Operation Manual
S
164201719 Rev 3
www.eaton.com/powerquality
3-1
Chapter 3
MBM Installation Plan and Unpacking
Use the following basic sequence of steps to install the Maintenance Bypass
Module (MBM):
1.
Create an installation plan for the MBM (Chapter 3).
2.
Prepare your site for the MBM (Chapter 3).
3.
Inspect and unpack the MBM cabinet (Chapter 3).
4.
Unload and install the MBM cabinet, and wire the system (Chapter 4).
5.
Complete the Installation Checklist (Chapter 4).
6.
Have authorized service personnel perform preliminary operational checks and
start up the system.
NOTE
Startup and operational checks must be performed by an authorized Eaton Customer Service
Engineer, or the warranty terms specified on page NO TAG become void. This service is offered as part of the
sales contract for the UPS system. Contact an Eaton service representative in advance (usually a two-week
notice is required) to reserve a preferred startup date.
3.1
Creating an Installation Plan
Before installing the MBM, read and understand how this manual applies to the
system being installed. Use the procedures and illustrations in paragraph 3.2 and
Chapter 4 to create a logical plan for installing the system.
3.2
Preparing the Site
For the MBM to operate at peak efficiency, the installation site should meet the
environmental parameters outlined in this manual. If the MBM is to be operated at an
altitude higher than 1500m (5000 ft), contact an Eaton service representative for
important information about high altitude operation. The operating environment must
meet the weight, clearance, and environmental requirements specified.
3.2.1
Environmental and Installation Considerations
The MBM installation must meet the following guidelines:
S
The system must be installed on a level floor suitable for computer or electronic
equipment.
S
The system must be installed in a temperature and humidity controlled indoor area
free of conductive contaminants.
S
The cabinet can be installed in
line‐up‐and‐match
or
standalone
configurations.
Failure to follow guidelines may void your warranty.
Figure
