manualshive.com logo in svg

Eaton Powerware 9395 275 kVA MBM, Installation And Operation Manual, Page: 35 / 86

Share
Download
Eaton Powerware 9395 275 kVA MBM Installation And Operation Manual Download Page 35

MBM INSTALLATION

Eaton 9395 Maintenance Bypass Module Installation and Operation Manual  

S

  164201719 Rev 3

 www.eaton.com/powerquality

4-3

Shipping Bracket
Bolts

Shipping Bracket
Bolts

Front Doors

Pallet

Right Side Shipping
Bracket

Figure 4‐2. Removing the Right Side Shipping Bracket

4.3

MBM Installation

The method used to install the MBM depends on the type of installation. The MBM
can be installed as a 

line-up-and-match

 or 

standalone

 system. The term

line-up-and-match

 refers to cabinets that are physically attached to the UPS, and the

wiring between them is internal. The term 

standalone

 refers to cabinets that are not

physically attached to the UPS, and are wired with external customer-supplied conduit
and wiring.

S

To install a 

line-up-and-match

 MBM, proceed to paragraph 4.3.1.

S

To install a 

standalone

 MBM, proceed to paragraph 4.3.4.

NOTE  

If a Field Installed UPM (FI-UPM) is installed or will be installed in the future, the MBM must be

installed in a standalone configuration.

Summary of Contents for Powerware 9395 275 kVA MBM























































































Reviews:

No comments