Eaton Powerware 9390-160/100 Installation And Operation Manual Download Page 89

Page: 89 / 226

Using the Control Panel

9-13

EATON

Powerware

9390 UPS (100–160 kVA) Installation and Operation Manual

164201554 Rev E

powerware.com

Press the

SETUP

pushbutton on the KW Demand Log Summary Menu bar to display the

Current KW Demand Log Setup screen 1.
The Current KW Demand Log Setup screen 1 displays the current user-defined log settings.

If no log settings are configured, the screen will display KW LOG DISABLED. Figure 9-15

shows the Current KW Demand Log Setup screen 1.

To return to the KW Demand Log Summary screen, press the

pushbutton on the

menu bar.

CURRENT KW DEMAND LOG SETUP

CHANGE

TIME INTERVAL MONITORED

MAXIMUM LEVEL (KW)

3 MINUTES

*** KW

Figure 9-15. Current KW Demand Log Setup Screen 1

Summary of Contents for Powerware 9390-160/100



































































































































































































































Search results

Summary of Contents for Powerware 9390-160/100

Reviews:

Eaton Powerware 9390-160/100, Installation And Operation Manual, Page: 89 / 226

Search results

Summary of Contents for Powerware 9390-160/100

Reviews: