EATON
wb-xp2-en
6
Joint Pack
Step 1.
Mount Busbar A fi rmly to the Unistrut®
Step 2.
Attach the rear joint pack cover to
Busbar A
Busbar A
Socket screw X2
Rear joint
pack cover
Step 3.
Install joint pack, never
force the joint or strike it
with any object, as this
may damage the joint or
the busbar section. The
joint should be inserted
by means of constant
force i.e. pushing by hand
or means of a suitable
clamping arrangement. The
images show 2 methods of
installing the joint pack.
* Before joining the two
separate sections of the
Busbar trunking, ensure
that all contact surfaces
are:
free from contaminates
unblemished
not damaged
correctly aligned
Step 4.
a)
Position
Busbar B as shown
in the image. Ensure
that the Earth side plate is not
overlapping the Expansion Rib.
Ensure the 2 sections of Busbar
trunking are 275mm ±1mm apart
and that the joint pack is centred
between them.
b)
Mount Busbar B fi rmly to the
Unistrut®.
c)
Attach the rear joint pack cover to
the Busbar B.
Busbar A
Earth side plate
Expansion Rib
Busbar B
The steps below outline best practice, the Busbar orientation and site conditions may restrict installers from adhering to this
methodology. In these cases installers must be cautious and ensure the joint pack is installed correctly. Ensure all parts are
meggered and visually inspected prior to installation.
Summary of Contents for Power Xpert XP2
Page 8: ...EATON wb xp2 en 8...
