![background image](http://html1.mh-extra.com/html/eaton/power-xpert-pxm-4000/power-xpert-pxm-4000_quick-start-manual_3699421014.webp)
Page 14
IB02601007E
www.eaton.com
2. Quick Start Guide for the Meter
For further details about the following steps, refer to Meter Settings using the Web Server,
in the User and Installation Manual (IM02601004E).
1. Open a web browser. After “http:\\”, type in the IP address of the CE Ethernet port in
the address box and click OK. The Meter Webserver Home Page will be displayed. (If
DHCP is enabled, the user must find the IP address via the Local Configuration port
[Setup->Diagnostics->Communication->Ethernet Status] or Local Display).
2. Enter the Username and Password. The defaults are: Username = admin and Pass-
word = admin. After entering the Username and Password, click Log In. After clicking
Log In, you will be asked to change the admin password.
3. On the Meter Webserver home page, click Settings, then Quick Setup to display basic
configuration setup.
4. Click Edit to make changes to these parameters.