Eaton POW-R-COMMAND 1000 User Manual Download

Page: 23 / 84

EATON

Power Xpert

Gateway Series 1000 Card User’s Guide

164201670 Rev 1

Chapter 2

Configuring the Card

NOTE

If DHCP is disabled and you will be using host names for servers, such as the mail

server, Network Time Protocol (NTP) server, SNMP hosts, Modbus

/TCP hosts, or trap

recipients, enter the IP address of your network DNS Server (see “Network Configuration” on
page 16).

NOTE

You must be logged in as admin to configure the card. Once you have logged in as

admin, it is important to completely exit the browser to set the security level back to the
standard read-only level.

This section explains:

Changing the passwords

Setting the date and time

Configuring SNMP options and managing from an SNMP NMS

Configuring Modbus TCP/IP options

Configuring e-mail notification

Configuring the Powerware Environmental Monitoring Probe (EMP)

Configuring auto discovery settings

Summary of Contents for POW-R-COMMAND 1000





















































































Search results

Summary of Contents for POW-R-COMMAND 1000

Reviews:

Related manuals for POW-R-COMMAND 1000

Brands by name

Popular brands

Eaton POW-R-COMMAND 1000, User Manual

Search results

Summary of Contents for POW-R-COMMAND 1000

Reviews:

Related manuals for POW-R-COMMAND 1000

Brands by name

Popular brands