background image

2

Table of Contents

1.   Package Contents  

2

2.   Features 

2

3.   System Requirements 

3

 3.1   Computer 

3

 3.2   Console 

3

 3.3   Cables 

3

 

3.4 Operating Systems 

3

4. Introduction 

4

 4.1   Front View of Console KVM Switch 

4

 4

.2   Rear View of Console KVM Switch 

5

5.   Installation 

5

 

5.1   Pre-Installation Safety Instructions 

5

 5.2   Rackmounting Instructions for Console KVMs  6

 

5.3   Grounding 

7

 

5.4   Single-Station Installation 

7

 

5.5   Multiple-Station (Daisy-Chained) Installation  7

 

5.6   Hot Plugging 

8

6.   Basic Operation 

8

 6.1   Opening the NetDirector Console KVM 

8

 6.2   Closing the NetDirector Console KVM 

8

 6

.3   LCD OSD (On-Screen Display) Configuration 

9

 

6.4   Sharing USB Peripheral Devices 

9

 

6.5   Powering Off and Restarting 

9

7.   Hotkeys 

10

 

7.1   Invoking the Hotkey Mode 

10

 

7.2   Port ID Numbering 

10

 

7.3   Selecting the Active Port 

10

 

7.4   Auto-Scanning 

11

 

7.5   Starting Auto-Scan 

11

 

7.6   Pausing in Auto-Scan 

11

 

7.7   Skip Mode 

11

 

7.8   Hotkey Beeper Control 

11

 

7.9   Computer Keyboard/Mouse Reset 

11

 

7.10 Quick Hotkey Control 

12

 

7.11 OSD Hotkey Comtrol 

12

 

7.12 Port OS Control 

12

 

7.13 Restore Default Values 

12

 

7.14 Hotkey Summary Table 

12

8.   OSD (On-Screen Display) Operation 

13

 8.1   OSD Overview 

13

 

8.2   Logging-In for the First Time 

13

 

8.3   OSD Invocation Sequence 

13

 

8.4   OSD Navigation 

13

 

8.5   OSD Main Screen Headings 

13

 

8.6   OSD Functions 

14

9.   Firmware Upgrade Utility 

17

 9.1   Before You Begin 

17

 9.2   Starting the Upgrade 

18

 9.3   Upgrade Succeeded 

18

 9.4   Upgrade Failed 

18

 9.5   Firmware Upgrade Recovery 

19

10.  Appendix A 

19

 

10.1  Specifications 

19

 

10.2  OSD Factory Default Settings 

20 

 

10.3  Keyboard Emulation 

20

11.  Warranty 

21

•  (1) B020-U16-19-KG or  B020-U16-19-KF KVM Switch
•   (8) P778-006 USB/PS2 Combo KVM Cable Kits
•   (1) USB/PS2 Combo Console Cable Kit
•   (1) RJ11 to DB9 Firmware Upgrade Cable
•   (1) C13 to C14 Power Cord
•  (1) Quick Start Guide
•   (1) Grounding Wire
•   (1) Rackmount Hardware Kit (Pre-Installed)
Check to see that the unit arrived undamaged and with all of its contents. Contact your dealer if there is a problem.

•  Integrated KVM console with 19” LCD for the B020-U16-19-KG and B020-U16-19-KF models.
•  B020-U16-19-KG and B020-U16-19-KF models include (8) P778-Series USB/PS2 Combo KVM Cable Kits.
•  B020-U16-19-KG and B020-U16-19-KF models include an external console port, allowing an external local console (PS/2 or USB) to be 

connected. An additional USB port is included on the front panel can be used with an external mouse.

1. Package Contents

2. Features

Summary of Contents for NetDirector TRIPP LITE Series






















Reviews: