33
XCHARGEIN MOBILITY INSTALLATION MANUAL
MN191005EN April 2021 www.eaton.com
00
Title
7.4 How to start charging
To start a charge, simply connect the appropriate charging cable to the car socket. Hold the RFID card in front of the
reader (if the charging station is equipped with a RFID reader).
If the card is recognized, the charging station status display shows a blue battery “topping up” during the charge.
If the card is not authorized, the charge will not start, and a red triangle is displayed on the charging station status
display.
If the charging cable is disconnected from the car and there is no power consumption within two minutes, the user is
automatically deauthenticated.
7.5 Display indicators
The table below summarizes the possible display indicators during the operation.
Visual indicator
Description
Status
Charging station ready for use, available
charging cable or no authenticated user
Ready
Charging station in use, waiting to establish
a communication with the car
In operation
Charging station in use, vehicle charging
In operation
Charging station in use, error in charging
Fault
Charging station stopped or not working
Not operating
Charging complete
Car fully charged
Table 10. Display indicators of Eaton xChargeIn Mobility
