manualshive.com logo in svg

Eaton Green Motion DC 22, Installation Manual

Share
Download
Eaton Green Motion DC 22 Installation Manual Download Page 33

29

 GREEN MOTION DC 22 EV CHARGER INSTALLATION MANUAL

   MN192004EN   November 2022   www.eaton.com

00

Title

7.  Commissioning 

7.1  Unit switch-on

Professional and qualified personnel must be expert in the field, and are therefore responsible for 

commissioning the system in accordance with the manufacturer’s instructions and local legislation.

Before switching on the EV charger, check the effectiveness of the safety measure(s) of the system in 

accordance with the local regulations.
Electrical systems or devices must be checked by the installer of the system before commissioning and 

switching on the unit.
Before switching on the product, please do the following:

Step 1.

   Check that the equipment is correctly fixed to the wall or the floor-mount pedestal in accordance 

with local regulations.

Step 2.

   Check that the electrical connections have been made correctly in accordance with local 

regulations.

Step 3.

   Check that the EARTH connection (MANDATORY) has been made correctly in accordance with 

local regulations.

Step 4.

   Perform checks on the continuity of the connections of the protective conductor, insulation 

resistance, RCD triggering current, triggering time, etc., in accordance with local regulations.

Step 5.

  Verify that the front door is closed and secured with the fixing screws.

If the checks listed above were successful, proceed as follows:

Step 1.

  Close the main AC GRID circuit breakers.

Step 2.

  Wait for the display to turn on.

Step 3.

  Visit the link or scan the QR code to fill out the installation checklist form at:  

        https://content.eaton.com/en-gb-installation-checklist-ev-chargers

7.2  Online station

The Green Motion DC 22 EV charger uses a software management system, Eaton Charging network manager which 

controls the EV charging stations network. Refer to the Eaton Charging network manager user manual, available on 

www.eaton.com, for further details.
The Green Motion DC 22 DC EV charger communicates with the remote database via the cloud infrastructure.

Figure 24.  QR code for installation  

checklist online form

Figure 25.  Simplified illustration of Green Motion DC 22 EV charger communication

Tag

Description

1

Green Motion DC 22 

EV charger

2

Cloud

3

Remote database

1

2

3

RFID

Summary of Contents for Green Motion DC 22

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands