ExoCab34 outdoor cabinet
User and Installation Guide
©Eaton Corporation 2018. All rights reserved.
Revision 0.1
Page 27 of 35
Step 3 - Connect new fan
1
Label then cut the wires and discard the old fan.
2
Fit new heat shrink tubing.
3
Twist and solder the wires to the new fan wires.
4
Heat the heat shrink tubing to insulate the connections.
Step 4 - Fit new fan
Reverse the removal process shown in Step 2.
After refitting the External cover, apply sealant to the top and sides (use a clear neutral
cure silicone sealant).
Step 5 - Switch on AC supply
1
Reconnect or plug in the AC supply
2
Check all fans are operating:
3
The fans will operate at low speed when the ambient air temperature is 20°C or
below.
4
Fan speed will increase up to maximum speed as the ambient air temperature rises
above 20°C.
Procedure complete
