![background image](http://html1.mh-extra.com/html/eaton/esr5-bws-31-24vdc/esr5-bws-31-24vdc_manual_4352057027.webp)
3 Installation
ESR5-BWS-31-24VDC
11/23 MN049020EN Eaton.com
24
3 Installation
CAUTION
WARNING
Always comply with all applicable country-specific safety rules and regula-
tions:
▶
1.Switch off and isolate
▶
2.Secure against retriggering
▶
3.Verify isolation from the supply
▶
4.Earthing and short-circuiting
▶
5. Cover or enclose any neighboring live parts.
What to do before turning the device back on
▶
1.Remove all tools and materials
▶
2.Leave the danger zone
▶
3.Remove the short-circuiting and grounding at the area where work was
performed and then elsewhere
▶
4.Disconnect the ground wire from the system components first, then
from the ground
▶
5.Do not touch system components or cables without a ground wire (if
there was one previously) anymore
▶
6.Reinstall all safety covers, safety enclosures, safety labels, and safety
signs.
▶
7.Do not remove safety measures at switching points until you get the all-
clear for the areas where work was performed
Installation requires qualified electrician
A ESR5-BWS-31-24VDC may only be fitted and connected by a
qualified electrician or a person who is familiar with electrical
installations.
Danger due to electric voltage!
All installation work must be carried out with the entire installa-
tion in a de-energized state.