5
Hardware description
EPCT FirE sEriEs FirE PumP ConTrollEr
MN124016EN August 2019 www.eaton.com
3.7 External pushbuttons
•
Start -
The start pushbutton is used to initiate a local
manual start of the pump motor.
•
Stop -
The stop pushbutton will initiate the stopping
sequence of the fire pump motor. Releasing the stop
button will put the controller back into the automatic
mode. If a starting condition exists, the pump motor will
start again once the stop button is released.
3.8 Transfer switch components
Refer to Section 6 for the description of the transfer switch
components.
