31
UltraShift DM Clutch
Recalibration
Gen 2
1.
Using ServiceRanger, select the “Advanced Product
Functions” button located on the main menu.
2.
Select Eaton AutoShift Gen-2 from the product
selection screen.
Note: This screen will only appear if the vehicle is equipped
with more than one supported Roadranger product.
3.
Select Clutch Data from the “Advanced Product
Functions” screen.
4.
Save the clutch data by selecting the “Save Abuse
Info to a File” button.
Note: Use the truck VIN as the file name. The data file will be
saved to the ServiceRanger folder in the Clutch Data
subfolder (e.g. C:\Serviceranger\Clutch Data).
5.
Reset clutch abuse info by selecting the “Reset
Clutch Abuse Info” button.
6.
Recalibrate the new clutch by selecting the “Calibrate
Clutch” button.
Note: Failure to calibrate a newly installed clutch may result in
some initial harsh vehicle launches, as the system is
required to manually recalibrate.
Gen 3
1.
Using ServiceRanger, select “Advanced Product
Function” button.
2.
Select UltraShift transmission model (Gen 3) from
menu tree in the upper left.
3.
Select the VPA/SnapShot Utility and launch the func-
tion.
4.
Read the APF description and select “Next”.
5.
Enter the vehicle info and select “Next”.
6.
Select “VPA” from the dropdown “Data Source” field.
7.
Enter an output file name and location using Browse
Button or use default filename and location shown.
Note: If the default filename and location is used, the VPA
data file will be saved to the ServiceRangerData folder
in the VPA subfolder on the C:\drive.
8.
Select the “Start Transfer” button to download data
from transmission controller and then select “Next”.
9.
The output file can now be viewed, select “Finish”.
10. Select “Clear Clutch Data” button to clear data from
transmission controller.
11. If successful proceed to next step, if unsuccessful
exit function and re-enter. Contact Roadranger Call
Center 1-800-826-4357 for help.
12. Select the “Calibrate Clutch” button to calibrate new
clutch and the select “Finish” when complete.
