4
Manual CEAG CG-Controller for CG 2000/ZB-S
30080001458 (C) July 2016 www.ceag.de
SAFETY INSTRUCTIONS
•
In accordance with specifications, the
CG-Controller must be operated in an
undamaged and fault-free state!
•
When performing tasks on the emergency
lighting system, make certain that the
system is disconnected from electrical
power!
•
Note the various power supplies for
normal and emergency mode in this
regard .
•
Before placing the device in service,
the emergency lighting system must
be tested according to the instructions
listed in the “Installation” section of the
operating instructions!
•
Please note for all tasks on the device
applicable national safety and accident
prevention requirements and the
following safety instructions in the
operating instructions that are identified
by a
!
WARNING!
This system is part of the emergency and
main lighting system and therefore part of the
safety equipment of a building or company .
Unauthorised and unskilled work on
the equipment can lead to the failure of the
main and/or emergency lighting system and
hence to
•
significant hazards to persons
•
significant damage to plant and machinery
•
faults and interruptions in the production
process .
Once the system has been assembled, con-
nected up and commissioned, the following
additional operations must be carried out for
normal operation:
•
Monitoring and maintaining a record of
system functions
•
Safety measures during faults and
shutdowns
•
Carrying out the safety inspections as
required by statutes and directives
Notes:
You must comply with the national stat-
utes and directives governing the con-
struction and control of a system for main
and emergency lighting.
You must comply with the national stat-
utes and directives governing inspection
and safety tests (e.g. for function and
duration tests).
2 Important information about
safety at work and the safe
operation of an emergency
lighting system
Safety Instructions
1 Safety Instructions
