Instruction manual CCS 5, 15/ 10/ 2021
13
measurement
Accomplish of the measurements with various measuring programs (single, continuous,
cyclic), and the fluid type in need. The CCS 5 must be connected acc. To the capital 2.3).
File system
For analysis, transferring and manage of the saved measurement results.
System settings
Settings of date, time, brightness of the display, as well as software update.
System information
Showing the software version, calibration date, system date/time, charging current of the
battery.
2.5.2.
measurement
•
For the measuring in the appropriate operating mode (depending upon the hydraulic
connection, see chapter 2.3.
•
The following parameters are entered in the setup menu
“Setup”
:
•
Name of the measuring point
•
Selection of the measure-mode
•
Selection of the report standard (ISO 4406:99, NAS 1638, SAE AS 4059)
•
Selection of the flush time (15 ~ 300 seconds)
•
Selection of the test fluid
Measuring point:
A virtual keyboard will show up by touching the filed:
