IB ATS-1005
For more information visit: www.eaton.com
Instructional Booklet
Effective: March 2010
Page
9
Instructions for Installation, Operation and Maintenance of the
Eaton ATC-600 Automatic Transfer Switch Controller
Figure 2. ATC-600 (Left and Right Side Views).
2.4 External Hardware (Communication Module)
External hardware is viewed as any optional device mounted
directly to or remotely from the ATC-600, such as a communica-
tion module. Communications is made possible by mounting a
small, addressable communication module (PONI) to the back of
the ATC-600 (Figure
3
) or in a remote location. Since the ATC-
600 is always supplied with a communications port, a PONI can
be easily retrofitted to the ATC-600 at any time.
It is recom-
mended that the control power to the ATC-600 be removed prior
to connecting or disconnecting a PONI.
When using the INCOM
PONI on the ATC-600, the PONI function switches should be set
to either of the Standard PONI modes (PONI 9600 Baud or PONI
1200 Baud). Refer to the instruction details supplied with the
PONI for details.
Figure 3. Communication Module - PONI (mounted).
LEFT SIDE VIEW
Communication Module
Connector
J4 (Inputs) Terminal Block
(DC Wetted Contact)
J5 (Outputs) Terminal
Block (Dry Relay Contacts)
J1, J2, J3 Source/Load
Connectors
Program/Run
Toggle Switch
J7 Sources 1 and 2
Control Power Connector
RIGHT SIDE VIEW
ATC-600 Controller - Breaker Type (CAT#8160A00G41)