General Description
Copyright © 2007-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-52D July 2010
5
System Controller
The SC200 or SC100 system controller provides control, communications and alarm functions.
The system controller is supplied pre-configured. Configuration changes can be made with the
keypad, or via a PC connected to the USB connector (SC200) or RS232 (SC100) connector. Or
changes can be made remotely (see External Communications on page
).
For basic operating information see System Controller on page
. For further details refer to
the System Controller Operation Handbook (see Related Information on page
See Troubleshooting on page
in the System Controller Operation Handbook for details of
system controller alarms.
SC200 System Controller
The SC200 system controller is an advanced control and monitoring solution which provides a
full suite of communications options, including built-in Ethernet interface, Web server, and
SNMP agent.
Alarm notifications may be by SNMP traps, SMS text messaging, dial-out to PowerManagerII
remote monitoring software, or relay contact closures.
"
Power on LED (green)
#
Minor alarm LED (yellow)
$
Critical/Major alarm LED (red)
%
Color LCD
!
Soft keys (2)
&
Navigation keys (4)
3
USB 1.1 connector (12Mb/s)
4
Retaining screw
5
Power and system
communications connector
'
RS232 connector
(
Ethernet connector and
status LEDs
SC100 System Controller
The SC100 system controller is a full-featured control and monitoring solution which provides
alarm notifications via dial-out modem to PowerManagerII remote monitoring software, SMS
text messaging, or by relay contact closures.
