Eaton 500, Installation And User Manual

Page: 6 / 29

5
MAU-00044/AD
E
N
gl
IS
h
Troubleshooting
(For further information, visit the www.eaton.com site or contact after-sales support.)
��
��
◗
The battery backup outlets
6
are not supplied with power.
◗
The connected devices are not
supplied when AC power fails.
◗
AC power is available, but
the UPS operates on battery
power.
◗
The filtered outlets 7 are not
supplied.
Problem Diagnostic Solution
◗
Button
8
is not pressed.
◗
The devices are not connected to
the battery backup outlets 6 .
◗
Circuit breaker 10 , has been
tripped by an overload on the UPS
output.
◗
The wall outlet is not supplied.
◗
Circuit breaker 10 , has been
tripped by an overload on the
UPS
output.
◗
Press button 8 and check that it
turns green.
◗
Connect the devices to the battery
backup outlets 6 .
◗
Disconnect excess equipment
and reset the circuit breaker
10
by
pressing the corresponding button.
◗
Supply power to the wall outlet.
◗
Disconnect excess equipment
and reset the circuit breaker 10 by
pressing the corresponding button.
◗
Green button 8 flashes:
- frequently.
-every 5 seconds
-every 2 seconds
-continually and the
audio alarm beeps
◗
The UPS frequently operates on
battery power because the AC
power source is of poor quality
◗
Have the electrical installation
checked by a professional or use
another wall outlet.
1
2
3
4
5
6
7
8
9
◗
The UPS operates on battery
power, beginning of battery backup
time
◗
The
UPS
operates on battery
power, end of battery backup time.
◗
The battery has reached the end of
its service life.
◗
Have the battery replaced.
◗
Green button 8 is off and
the audio alarm beeps every
1 second.
◗
A fault has occurred on the UPS .
The battery backup outlets 6 are
no longer supplied.
◗
Green button 8 is on and
the audio alarm beeps every
1 second.
◗
Call after-sales support.
◗
Green LED 9 is off
◗
Surge protection is no longer
provided.
◗
Call after-sales support.
◗
The telephone line is
disturbed or modem
access is not possible.
◗
Surge protection on the telephone
line is no longer provided.
◗
Disconnect the telephone line from
the wall outlet.
◗
Call after-sales support.
◗
The UPS battery backup outlets 6
are overloaded.
◗
Disconnect excess equipment
connected to the battery backup
outlets 6 .