Oslostrasse 5, CH
–
4023 Basel
Tel. +41 [0]61 333 70 33, Fax +41 [0]61 333 70 32
www.easyrain.net [email protected]
Brunner Bewässerung - Arrosage
Gebrauchsanweisung Steuerung ESP-TM
16
ESP-TM Installation and Operation
Page 29
Wires connected to the flip strip should be stripped to
expose 1/2" of conductor at the end. Do
NOT
use wires
larger than 16 gauge. Wires smaller than 18 gauge
should be doubled over before being inserted into the
flip strip.
To connect field wires, raise the flip strip lever to the
open position. Insert the stripped wire into the round
hole beneath the lever. Then lower the flip strip lever to
grip the wire.
Tug gently on each wire to make sure it's securely
connected.
The "flip strip" connector, shown in this illustration,
allows fast and easy connection of field wires.
Connect Field Wiring
1
2
3
ESP-TM Installation and Operation
Page 30
