Oslostrasse 5, CH
–
4023 Basel
Tel. +41 [0]61 333 70 33, Fax +41 [0]61 333 70 32
www.easyrain.net [email protected]
Brunner Bewässerung - Arrosage
Gebrauchsanweisung Steuerung ESP-TM
8
Fixed Schedule
Make sure the Schedule Slide switch is set to a fixed-
day schedule: 2, 3, or 5.
Turn the dial to "DAY."
The display shows "1" for the first day of the watering
cycle. Day 1 is always the watering day.
Press or to change the current day from 1.
If you want tomorrow to be the watering day, change
the current day to the last day in your fixed schedule.
For example, if you're using a two-day schedule and
you want to start watering tomorrow, set the current
day to "2." If you're using a three-day schedule and
you want to start tomorrow, set the current day to "3."
1
2
3
4
ESP-TM Installation and Operation
Page 13
Select Program
The program that is currently selected appears in the
far left corner of the display. The display will show
either "PGM A" or "PGM B."
To select the program, press the A / B (or PGM)
button until the program you want appears in the
display. Pressing the A / B button switches back and
forth between the two programs.
The ESP-TM controller has two programs, A and B. Each
program operates independently.
If you are using the custom watering schedule, each
program can have different watering days. For example,
Program A might run on Monday, Wednesday, and Friday;
Program B on Tuesday, Thursday, and Saturday.
If you are using a fixed watering schedule, both programs
will have the same "ON" days. For example, if you are
using the three-day fixed schedule, Program A and
Program B will both run every third day.
You can assign any station to Program A, Program B, or
both.
2
1
ESP-TM Installation and Operation
Page 14
