easyRAID X12P F2R4, User Manual

Page: 97 / 114

4-445
Advanced Information
SSA AN N M Ma asskk SSe ettuup p
Step 3.
In “SAN Mask” , choose “SAN Mapping” , then “Primary FC”
Step 4.
Setup the LUN No. to expected Host No.
“Host 1”
to
“Select LUN0”.
Then “Yes” to activate the setting.
The function is to limit host to access (Read/write) the data in the
selective LUN No. in the disk array. Users could map multiple Hosts
(max 8 hosts) No. to multiple LUNs No. (max 8 LUNs per FC Channel)
accordinly.
For example:
Setup “Host 1” to “LUN0”, “Host 1” to “LUN1”, “Host 2” to “LUN1” and
“Host 2” to “LUN2”.