easyRAID E6, User Manual

Page: 43 / 85

3-7
Configuration
Configuration from VT100 Terminal Mode
By connecting a VT100 compatible terminal or a PC operating in a
terminal emulation mode, a configuration can be performed
through this interface.
To ensure proper communications between the "Disk Array" and the
"Terminal", Please configure the VT100 terminal settings to the values
shown below :
VT100 Terminal ( or compatible ) Set up
Connection Serial Port ( COM 1 or COM 2 )
Protocol RS232 ( Asynchronous )
Cabling Null-Modem cable
Baud Rate 115,200
Data Bits 8
Stop Bit 1
Parity None
Keyboard Function Key Definitions
"
Enter
" key, Use to confirm a selected item
"
ESC
" key, Use to exit a selection
"
A
" key, Use to scroll the cursor Upward / Rightward
"
Z
" key, Use to scroll the cursor Downward / Leftward
"
Tab
" key, Use to switch mode ( Menu / Output Area )