manualshive.com logo in svg

easyRAID E6, User Manual

Share
Download
easyRAID E6 User Manual Download Page 11

1-3

Introduction

  Solid reliability

Automatic failed disk drive detection.
Auto rebuild : when a replacement disk installed (or by using hot  

     spare disk ), The system provides automatic data rebuild without  
     any commands or functions keyed in. ( Transparent to Host )
 

  Efficient maintenance

An LCD status panel displays a comprehensive readout of the 

     operating status, and the HDD LED indicators on each HDD tray 
     display the individual HDD status. 

When disk failure occurs on a member disk of the disk array, the 

     built-in buzzer sounds  simultaneously and LCD status panel 
     also points out the location of the failed hard disk drive. In the 
     meantime the LED HDD status indicator will light up " Red "on the 
     failed HDD tray , according the LED indicator on the HDD tray you 
     can perform quick, efficient and correct maintenance. 

Hot Swap : allows you can remove and install the " Hot Swap "

     parts without interrupting data access while the system is on.

The " Hot Swap " parts include the Hard Disk Drive, Redundant

     Power Supply Unit and Cooling Fan.

Summary of Contents for E6






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands