manualshive.com logo in svg

easyRAID E6, User Manual

Share
Download
easyRAID E6 User Manual Download Page 21

Introduction

  RAID                             Function                                Drives required
 Level                           Description                                  Min.     Max.

           "Disk Striping" , block striping is used,
    0      which yields higher performance than with         2           6
            the individual disk drives.
            * There is no redundant function.

           "Disk Mirroring" , Disk drives are mirrored ,
    1      All data is 100% duplicated on each                  2           6
            equivalent disk drives.
            * High Data Reliability

           " Parallel Transfer Disks with Parity ", 
    3      Data is striped across physical drives.                  3           6
            Parity protection is used for data 
            redundancy.

Based on the needs of a Disk Array's capacity, data availability, and 
overall performance, you can select a proper RAID level for your 
Disk Array. The supported RAID levels are shown in below :

            " Independent Access Array with Parity ", 
    5      Data is striped across physical drives.                  3           6
            Rotating Parity protection is used for data 
            redundancy.

 
  0+1   " Disk Striping " + " Disk Mirroring " Function.          4           6

Supported RAID Levels

1-13

Summary of Contents for E6






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands