Page 20
Technical Documentation EASYRO
®
Water Treatment Systems© 2015 easymetal GmbH.
This information is subject to copyright laws and may not be reproduced or changed without express written permission of easymetal GmbH.
IMPORTANT NOTES
IMPORTANT
EASYRO
®
systems must be installed by a qualified technician trained by
easymetal. Any other installation will render the warranty null and void.
WARNING
Do not expose the EASYRO
®
system to extreme temperature changes in
order to avoid the formation of condensation. The condensate may damage the
electronics of the system.
CAUTION
Make sure the ventilation slots on the unit are not covered and do not installed
the system too close to the wall, because inadequate ventilation causes overheating
of the internal pump!
CAUTION
The electrical connection of the EASYRO
®
unit must comply with the standards
of the ÖVE (Austrian Electrotechnical Association). The system must feature the
corresponding protection devices (residual-current-operated circuit breakers and
line protection switches/fuses).
IMPORTANT
Please note that that the line pressure and other line requirements must comply
with the Technical Data.
If values drop below the pressure limit, the system may no longer function reliably.
Values exceeding the maximum may damage the membranes.
IMPORTANT
Do not disconnect the EASYRO
®
system from the water or power supply
during operation. The system is programmed in such a way that the integrated
automatic flushing cycles rinse the membranes even when the system has not
been productive for an extended period of time. This automatic process is
important to avoid contaminants or particles accumulating on the membranes.
If the system will not be used for more than 10 days, there is a danger of bacterial
contamination.
The production of healthy and potable drinking water cannot be ensured any
more. In this case, all water lines and membranes must be renewed.
