GT200 series general purpose inverter instruction manual
2.2 Disassembling and installation of inverter panel
2.2.1 Cover plate disassembly and installation of plastic enclosure inverter
Disassemble Cover Plate
Shown as diagram2-10,push out the hooks on the left and right sides of the cover from
inside at 1 direction with tools, then lift the panel from direction 2
Install Cover Plate
Shown as diagram2-11,Align the groove above the cover with card buckle on the
enclosure,press down the cover plate from direction 1 , until we hear a "click" sound
1
2
1
1
Diagram2-10 Disassembly of cover Diagram2-11 Installation of cover
2.2.2 Cover plate disassembly and installation of Sheet metal inverter enclosure
Disassemble Cover Plate
Shown as diagram2-12,Disassemble mounting screw at Cover plate 1 ,then lift the panel
from 2 direction
Install Cover Plate
Shown as diagram 2-13,Card buckle on cover embedded groove of the inverter enclosure,
according to the direction 1 install cover plate,then tighten the screws at the cover 2.
17
