Easy PocketNAV.com OnCourse Navigator 4, User Manual

Page: 111 / 115

User's manual OnCourse Navigator | 4
Glossary - 109 -
8 Glossary
COM-port A COM port is a connector to a communications interface, usually
the serial port. The ports are numbered by a number behind
“COM”. A communications interface is designed to connect
hardware like a mouse or a GPS receiver.
GMT GMT (Greenwich Mean Time) is the mean solar time at the Royal
Greenwich Observatory in Greenwich near London, England,
which by convention is at 0 degrees geographic longitude.
Theoretically, noon Greenwich Mean Time is the moment when
the Sun crosses the Greenwich meridian (and reaches its highest
point in the sky in Greenwich). Up to 1972, GMT was the global
time standard. Because of the Earth's uneven speed in its elliptic
orbit, GMT has been replaced by UTC (Universal Time
Coordinated) which is an ultra stable time standard based on
atomic clocks.
GPS The GPS (Global Positioning System) is based on 24 satellites
which are in orbit round the earth. They are permanently
emitting the time and their current position. The GPS receiver
receives this information and calculates the longitude and the
latitude of its own current position.
The signals of at least three satellites are needed to determine
the longitude and the latitude. With the signals of at least four
satellites the elevation may be calculated, too. The determination
has an accuracy of about 3 yards.
HDOP The Horizontal Dilution of Precision (HDOP) indicates the quality
of position determination. Theoretically any value from 0 to 50 is
possible. The smaller the value is, the more accurate is the
position determination (value 0 = no deviation from the actual
position). Values up to 8 are convenient for street navigation.
Points of Interest Points of Interest are covered by the map and may be displayed
on it. Harbors, airports, restaurants, hotels, petrol stations,
public buildings, and others belong to the Point of Interest. You
may determine Point of Interest as itinerary points for navigation
purposes.
Map exportation In MapExport, exportation of maps means the determination of
segments of the base map and their storage on the hard disk of
your PC.
Map transfer With MapExport you may transfer customized maps (which are
stored on your PC) and Standard maps (included within the
delivery) to your Pocket PC.