INTRODUCTION
Routine maintenance includes operations that have to be done
periodically throughout the entire life of the machine and with
scheduled frequency.
Inspection and careful maintenance allow the machine to work
continually and with maximum efficiency. The following is a list
of operations to be performed on the machine.
Remember also that the prompt replacement of a worn part
avoids further damage and reduces the time that the machine
is inoperative.
Other maintenance work not covered by this section is to be
considered as special maintenance and is not part of the duty
assigned to the operators who use the
machine. This kind of work must be done by a specialized work-
shop.
Spent lubricants and other liquids must be collected and dis-
posed of according to the provisions of law since pouring them
onto the ground causes pollution.
DANGER
All maintenance work must be done with the motor
switched off, the electrical voltage to the panels cut
off and the machine in stowed condition.
WARNING
A few pages have been added to this manual so that
the operator assigned to maintenance can keep
notes of the maintenance work done and the number
of hours the machine has worked, in the latter case
making use of the hour-meter .
VEDLIGEHOLDELSE
MAINTENANCE
98
mod. R 160
INDLEDNING
Ved periodisk vedligeholdelse forstås de indgreb, som skal
udføres regelmæssigt under hele maskinens levetid og med
bestemte intervaller.
Eftersyn og omhyggelig vedligeholdelse giver maskinen
mulighed for at altid at arbejde med maksimal ydelse.
Desuden minder vi om, at et hurtigt indgreb på en hvilken som
helst slidt komponent forhindrer, at der sker større skader, og
nedbringer maskinens nedetid.
Andre indgreb, som ikke er behandlet i dette afsnit, skal forstås
som ekstraordinær vedligeholdelse, og hører ikke med til de
opgaver, som tildeles operatørerne, der burger maskinen. Disse
indgreb skal udføres af et specialiseret værksted.
Brugte smøremidler eller væsker skal indsames og bortskaffes
i overensstemmelse med gældende bestemmelser, da deres
udledning til terrænet er miljøskadende.
FARE
Alle vedligeholdelsesprocedurer skal obligatorisk
udføres
med
slukket
motor,
afbrudt
spændingsforsyning til panelerne og maskinen i
dvaletilstand.
OBS!
Der er tilføjet nogle sider til denne manual, hvor
operatøren, som udfører vedligeholdelsen, kan
notere de gennemførte indgreb og driftstimerne,
som kan aflæses vha. timetællere.