GREASING/LUBRICATION
The lubricators are indicated by RED caps. To
refill them it is necessary to remove the cap and
then pump grease in, until it comes out of the
joints which should be
moved a few times during this operation. Re-
place the red cap.
The smooth surfaces and the gears should first
be cleaned of spent grease with a spatula and
then lubricated with fresh grease using a brush.
Always remove exceeding grease.
WARNING
Damaged or clogged lubricators must always be
replaced.
WARNING
Use lubricant grease having the same character-
istics as that shown in the specific table in this
section.
VEDLIGEHOLDELSE
MAINTENANCE
101
mod. R 160
SMØRING
Smørekopperne er fremhævet med en RØD
hætte.
De fyldes ved at fjerne hætten og derefter
pumpe smøremiddel ind, indtil det løber ud af
leddene. Bevæg leddene et par gange under
proceduren. Sæt derefter hætten tilbage på
plads. Glatte overflader og tandhjul skal først
rengøres for gammelt smøremiddel og derefter
smøres med med en pensel.
Fjern altid overskydende smøremiddel.
OBS!
Beskadigede eller tilstoppede smørekopper skal
altid udskiftes.
OBS!
Brug smøremiddel, som har de samme egenskaber
som dem, der er anført i tabellen over smøremidler
i dette afsnit.