INSTALLATION INSTRUCTIONS
16
February 1996 – 1C7836
[5] Move the PROCESSOR into its operating position.
Important
Processor leveling is important for all PROCESSORS, but is critical for the SORTER to operate correctly on the
180 LPS PROCESSOR.
[6] Adjust the 4 LEVELING SCREWS until:
• The top of the REAR SITE TAB is 69.85 cm .16 cm (27
1
/
2
in. 1/6 in.) above the floor. Use the TAPE
MEASURE TL-2296.
• The PROCESSOR is leveled from side-to-side and front-to-back. Use LEVEL TL-1434.
[7] Tighten the JAM NUTS on the LEVELING SCREWS.
69.85 cm
(27.50 in.)
H127_0081BA
H127_0081BCA
REAR
SITE
TAB
H127_0185AA
H127_0185ACA
TL-1434
H127_0186AA
TL-1434
H127_0186ACA