EASTMAN 3434, Adjustments

Page: 2 / 88

2 01JUN99 – 5B6331
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be liable
for any loss or damage, including consequential or special damages, resulting from any use of
this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Important
This manual is for use by qualified service personnel only.
Warning
To avoid hazardous conditions, keep floors and floor coverings around your Kodak X-Omat 3000 RA Processor and
associated drains clean and dry at all times. Any accumulation of fluids from mixing tanks and drain lines should be
cleaned up immediately. In the event of an accumulation of liquid due to backup, overflow, or other malfunctions of
the drain associated with your
Kodak X-Omat 3000 RA Processor, call a plumber or other contractor to correct any
problem with the drain. Kodak accepts no responsibility or liability whatsoever for the serviceability of any drain
connected to or associated with a
Kodak X-Omat Processor. Such drains are the sole responsibility of the customer.
Description Page
Table of Contents
Service Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Special Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preventive Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Service Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preparing the PROCESSOR for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
De-energizing and Energizing the PROCESSOR . . . . . . . . . . . . . . . . . . . . . . . 7
Draining the TANKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Filling the TANKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Identifying the RACKS and CROSSOVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Removing and Installing the RACKS with Solutions in the TANKS . . . . . . . . . . 11
Identifying and Removing the COVERS and PANELS . . . . . . . . . . . . . . . . . . . 13
Removing the DRYER END PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Removing the Remaining PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RACKS and CROSSOVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the FEED TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Squareness of the CROSSOVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the Squareness of the RACKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the GUIDE SHOES on the DEVELOPER RACK . . . . . . . . . . . . . . . . . . . . 19
Adjusting the GUIDE SHOE on the DRYER RACK . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the DRIVE CHAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MAIN DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Removing the DRIVE SHAFT and the WORM GEARS . . . . . . . . . . . . . . . . . . . . . . 24
Removing and Adjusting the Tension of the DRIVE CHAIN . . . . . . . . . . . . . . . . . . . 27
Removing the DRIVE MOTOR B6 and the GEAR BOX . . . . . . . . . . . . . . . . . . . . . . 28