~ 24 ~
Respectively tighten 4 screws by the
screwdriver.
After confirming the location, respectively
tighten the screws. Check the base support and
the battery for proper and firm installation.
5.2.2.4 Installation of single battery
Tools: rulers, screwdrivers, screws(M4*8mm), angle irons(L50*30*22mm), expansion pipes
and bolts (M6*50mm) and expansion screw gasket (SUS304 gasket)
Align the angle iron with the screw holes on
the battery, and fix the angle iron by the
screws, but do not tighten the screws.
Make a mark at 35mm of the wall, align the
battery installed with the base support with the
marked location, pass the expansion screws
through the gasket, fix the angle iron on the
ground, and respectively adjust and tighten the
screws.
Summary of Contents for EAHI-6000-SL-S
Page 66: ...64...
