Figure 2.5.1 dynamic setting interface
Fig. 2.5.2 dynamic test interface
2.6 List test operation
The list test function can conveniently test the working conditions of the source under differe
nt loading conditions, which is conducive to the automatic test of the production line. By pre-settin
g the steps of list testing, the testing steps and parameters of the source to be tested can be edited i
nto a list and a series of tests can be completed in sequence. Specific settings include: setting the n
umber of steps, step mode, cycle switch, each step load mode, load size, delay time, comparison s
witch, upper limit value, lower limit value
Press the [Shift]+ [
◀
] (Menu) key to enter the list menu interface under the list test main
interface, adjust the knob to select the appropriate options, and press the [Enter] key to enter the
corresponding submenu
12