Two
、
Functional operation
In order to ensure the stability and safety of the load and the source to be tested, it is necessar
y to connect the load and the source to be tested according to the red positive and black, then turn
on the power output first, then turn on the load.
2.1 Remote / local handover operation
When the load works in remote operation mode, the top bar of the interface will have the corr
esponding icon display. At this time, the interface is locked, and the state and operation of the instr
ument can be controlled by the instructions of the host computer, and the local operation mode can
be switched back through the panel[Shift]+[
▶
](Local).
2.2 System setup operation
Press the[Shift]+[Esc](Utility) key to enter the system menu interface as shown in Figure 2.2.
1, you can rotate the knob to select and enter the corresponding sub-menu. In the system settings i
nterface can complete the language, restore factory settings, boot settings and other operations, the
settings system interface as shown in Figure 2.2.2.
Operation description
:
1.Select the operation item by rotating the knob. 2.Press [Enter] to
enter the sub menu interface or switch the contents of the operation item. 3.Press the[Esc] key to
return to the next level.
Fig. 2.2.1 system menu interface
Figure 2.2.2 system interface diagram
5