Fig. 2.8.1 battery test setup interface
Fig. 2.8.2.1 battery test CC interface
Fig. 2.8.2.2 battery test CR interface
2.9 LED test operation
CR-LED test can simulate the characteristics of the real LED lamp. By adding the diode on-
voltage setting in the traditional CR mode, when the load input voltage exceeds the diode on-
voltage, the load begins to work, which can truly reflect the load capacity of the LED driving
power supply.
Operation description
：
1.Select the operation item by rotating the knob. 2. set parameters.
Press the [Enter] key to enter editing mode, select the appropriate number of digits by the direction
17
