Figure 2.6 list menu interface
The setup interface and test interface are shown in Figures 2.6.1 and 2.6.2, respectively, and
the test result interface at the end of the test is shown in Figure 2.6.3.
List test setup interface operation instructions
：
1.Select the operation item by turning the
knob; 2. Edit the parameters by switching to edit state through the direction key; press the [Enter]
key after selecting the previous page or the next page to turn over the page. Press the [Enter] key
when the direction key is selected and saved to enter the list test parameter saving interface; 3. No
n-digital parameters in editing state can be saved by pressing the [Enter] key. Press the [Enter] key
to switch settings; 4. Press the [Enter] key to enter the editing mode, select the corresponding digit
s by the direction key, then rotate the knob to adjust the value, [Enter] or [Esc] key to exit the editi
ng; 5. Press [Esc] to return to the upper interface;
Test interface operation instructions
：
Press [On/Off] to start or close mode.
Figure 2.6.1 list setup interface
13
