Users manual
ET1260B and ET1260A
6 1/2 Digit Multimeter
8
1. Quick Start
1.1 Inspect Product Accessories
Confirm that multimeter is attached with the following subjects, among which the optional
accessories can be attached to products only after purchasing. If any subject is missed, please
contact the closest sale office.
Standard equipped accessories:
One set of hard-spot testing line and a
2mm probe
One piece of double-end three-core
power line
One pair of alligator clips
Two pieces of backup power fuses
ET32 User manual
Optional equipped accessories:
GPIB cable
Cabinet-installing suite
PT100 temperature probe
RS232 serial port line
USB data line
1.2 Front Panel
This 6 1/2 digit multimeter provides a 480*320 TFT display, and the equipped display can
indicate current working status, F1-F5 software define area, measured value, etc.
No.
Introduction
1
HI and LO sense input terminals. Use 4-wire resistance voltage to measure the input, or
refer to ratio measurement for voltage input.
2
HI and LO main input terminal, all functions exclusive of current)
3
480
×
320 TFT LCD
4
Function keys of digit multimeter. Select functions of digit multimeter, such as DC voltage,
AC voltage, DC current, AC current, resistance, continuity, diode test, frequency, period,
capacitance, ratio and sensor.
5
Direction and enter key can set measurement range and measurement rate in normal
measurement interface and can be used in menu selection and numeric value setting in
menu.
6
Soft power switch.
7
USB HOST interface is used for procedure updating and data storage.
8
F1-F5 softkeys. Softkeys are used to select different menu options in digit multimeter menu.
