EAS Electric ETH-80VM, Installation & Owner'S Manual

Page: 193 / 199

17
6.9 For Serviceman
6.9.1 About For Serviceman
6.9.2 How To Go To For Serviceman
FOR SERVICEMAN is used for installater and service engineer.
■ Setting the composition of equipment.
■ Setting the parameters.
Go to ''MENU'' > ''FOR SERVICEMAN''. Press ''OK''.
■ The FOR SERVICEMAN is used for installer or service engineer.
It is NOT instended the home owener alters setting with this menu.
■ It is for this reason password protection is requierd to prevent
unanthorised access to the service settings.
If you have set all the parameter.
Press ''BACK'', the following page will be appear
：
Select ''YES'' and press ''OK'' to exit the FOR SERVICEMAN.
After exiting the FOR SERVICEMAN, the unit will be turned off.
6.9.3 How To Exit For SERVICEMAN
OPERATION PARAMETER
P2 COMP. PRESSURE2 --kPa
POWER CONSUMPTION OKWH
SCROLL 5/5
OPERATION PARAMETER
T1B LEAVING WATER TEMP.2 25°C
30°C
T2 PLATE F-OUT TEMP.
45°C
T2B PLATE F-IN TEMP.
-7°C
T3 OUTDOOR EXCHANGE TEMP.
-7°C
T4 OUTDOOR AIR TEMP.
-7°C T5 WATER TANK TEMP.
SCROLL 3/5
OPERATION PARAMETER
COMP.RUN TIME4 1000HOUR
EXPANSION VALUE 240P
600 R/MIN FAN SPEED
0 A BACKUP HEATER1 CURRENT
0 A BACKUP HEATER2 CURRENT
T1 LEAVING WATER TEMP.1 25°C
SCROLL 2/5
OPERATION PARAMETER
Ta Room temp 25°C
P1 COMP. PRESSURE1 200kPa
SCROLL 4/5
25°C
Tw-0 PLATE W-OUTLET TEMP.
25°C
Tw-I PLATE W-INLET TEMP.
25°C
Th COMP. SUCTION TEMP.
25°C Tp COMP. DISCHARGE TEMP.
FOR SERVICEMAN
Please input the password:
ADJUST SCROLL ENTER
OK
0 0 0
FOR SERVICEMAN
Do you want to exit the for
serviceman?
SCROLL CONFIRM
OK
NO YES
The power consumption parameter is preparatory.
if some parameter is not be activated in the system, the parameter
will show "--"
INFORMATION
V.2