6
Setting Spool Pins
Winding the Bobbin
To use pu ll up the sp oo l p in . Pu sh down
U pper thread
U pper
thr ead
H ole
Tan gle
Open th e hoo k cover.
Raise th e ne edle by turni ng th e balance
whe el towa rd yo u.
Take out the bo bbin ca se b y holding the
la tch.
Wh en inserting the bobbin case, place
the horn into the recess of the hoo k
race.
for storage.
If t he t hrea d wo ul d slip d own fro m the
spool. thr ead thro ugh the hole of spool pin
as sh ow n.
Sw it ch on the machine.
Draw thread from spool. Guide the thread around t he bobbin winder thread guide.
Insert the thread through one of the holes in the bobbin from the inside to the outside.
Put the bobbin on the bobbin winder spindle, and push it to the right.
With the free end of the thread held in your hand,depress the foot control. Stop the m achine when it has m ade a few turns, and cut the thread close to the hole in
the bobbin.Depress the foot control again.
When the bobbi n is ful ly wound, it will be stop automatically.
Return the bobbin winder to its original position by moving the spindle to the left, and cut the thread . Turn the clutch knob clockwise.
Re mo vin g or I nserting the Bobbin Ca se
Switch off the m ach ine w hile doing th is.
Recess of the hook race
Horn
Cross the cotton in a figure of eight
for good tension.
PDF created with pdfFactory trial version
www.pdffactory.com
